Our Job Offers

Prepare work surfaces by cleaning, applying bonding agents, and installing metal or mesh lath when required.

Mix plaster, mortar, cement render, or other finishing materials to the required consistency.

Apply plaster or render to internal and external surfaces using hand tools and mechanical tools.

Smooth, level, and finish surfaces using trowels, floats, and straightedges.

Repair cracks, holes, and damaged plaster surfaces.

Apply decorative finishes such as textured coatings, stucco, or skim coating when needed.

Ensure proper drying and curing times.

Work closely with other construction workers, painters, and site supervisors.

Follow safety regulations and maintain a clean and organized work area.

Previous experience as a Plasterer or in construction finishing work.

Knowledge of plastering techniques, materials, and tools.

Ability to create smooth, precise, and high-quality finishes.

Good physical fitness and ability to perform manual labor.

Ability to work outdoors and indoors under different weather conditions.

Strong teamwork and communication skills.

Valid work permit for the target European country.

Safety certificate (e.g., VCA, CSCS, or equivalent).

Driver’s license.

Attention to detail and high-quality craftsmanship

Reliability and strong work ethic

Problem-solving skills

Ability to work efficiently and meet project deadlines

Install, maintain, and repair electrical wiring, lighting systems, sockets, switches, and circuit breakers.

Read and interpret electrical drawings, blueprints, and technical diagrams.

Inspect electrical systems to identify hazards, defects, and the need for repairs.

Troubleshoot electrical issues and perform corrective maintenance.

Install and connect distribution boards, control panels, and electrical equipment.

Ensure compliance with national and European electrical safety standards.

Test electrical systems using appropriate tools and devices.

Collaborate with construction teams, engineers, and site supervisors.

Maintain accurate documentation and reporting of work performed.

Follow strict safety procedures to prevent electrical hazards.

Previous experience as an Electrician in construction, maintenance, or industrial environments.

Knowledge of electrical codes, standards, and safety regulations (e.g., IEC, national standards).

Ability to read and understand technical drawings and wiring diagrams.

Skilled in installing and repairing wiring, electrical components, and systems.

Good physical condition and ability to work in various environments (indoor/outdoor).

Strong problem-solving and troubleshooting skills.

Basic understanding of tools and electrical testing equipment.

Valid work permit for the target European country.

Electrician certification or license (e.g., EU-recognized qualification, VCA, ECS, or local equivalent).

Driver’s license.

Attention to detail and precision

Reliability and strong work ethic

Strong communication and teamwork skills

Ability to work under pressure and meet deadlines

Install and repair water supply lines, drainage systems, and sanitary fixtures.

Fit and assemble pipes, valves, fittings, and drainage components.

Install bathroom and kitchen fixtures such as sinks, toilets, bathtubs, showers, and water heaters.

Read and interpret technical drawings, blueprints, and installation diagrams.

Inspect plumbing systems to identify leaks, clogs, defects, or required repairs.

Perform maintenance on pumps, boilers, and heating systems (depending on specialization).

Test plumbing systems for proper operation and safety compliance.

Collaborate with other trades (electricians, HVAC technicians, builders) on construction or renovation sites.

Use plumbing tools and equipment safely and efficiently.

Follow European and local plumbing codes and safety regulations.

Previous experience as a Plumber in construction, maintenance, or industrial environments.

Knowledge of plumbing materials, tools, and installation methods.

Ability to read technical drawings and plumbing schematics.

Skilled in diagnosing and repairing plumbing issues.

Good physical condition and ability to work in confined spaces when needed.

Strong understanding of safety practices and plumbing standards.

Valid work permit for the target European country.

Plumbing certification or license (e.g., EU-recognized qualification, VCA, or equivalent).

Driver’s license.

Attention to detail and problem-solving skills

Reliability and strong work ethic

Ability to work independently or as part of a team

Good communication skills

Ability to manage time and meet project deadlines

Install HVAC systems including air conditioning units, ventilation systems, heat pumps, and refrigeration equipment.

Diagnose and repair faults in HVAC and refrigeration systems.

Perform routine maintenance, cleaning, and inspection of HVAC units.

Check and recharge refrigerants according to environmental regulations (e.g., F-Gas standards).

Read, interpret, and follow technical drawings, wiring diagrams, and installation manuals.

Install and connect electrical components and control systems for HVAC equipment.

Test system performance and ensure proper airflow, temperature control, and efficiency.

Replace defective parts such as compressors, motors, fans, filters, and thermostats.

Ensure compliance with health, safety, and environmental guidelines.

Communicate effectively with clients, supervisors, and other technicians.

Previous experience as an HVAC or refrigeration technician.

Strong understanding of HVAC systems, refrigeration cycles, and diagnostic tools.

Ability to read and work with technical drawings and schematics.

Familiarity with European standards for refrigeration gases and environmental safety.

Knowledge of electrical systems related to HVAC equipment.

Good physical condition and ability to work in various environments (rooftops, mechanical rooms, outdoors).

Strong troubleshooting and technical skills.

Valid work permit for the target European country.

F-Gas certification (or equivalent EU-recognized refrigerant handling certificate).

HVAC/technical diploma or recognized vocational training.

Driver’s license.

Attention to detail and precision

Strong problem-solving abilities

Reliability and professional work ethic

Good communication and customer service skills

Ability to work independently or as part of a team

Ability to manage time and handle multiple tasks

Operate heavy machinery such as excavators, loaders, bulldozers, forklifts, cranes, rollers, telehandlers, and dump trucks.

Perform site preparation tasks including excavation, grading, trenching, and material handling.

Conduct pre-operation inspections to ensure equipment is safe, functional, and compliant with site standards.

Load and unload materials safely and efficiently.

Follow signals and directions from site supervisors, engineers, and ground workers.

Maintain accurate machine control while operating in tight or complex site conditions.

Perform minor maintenance tasks such as checking fluids, filters, and equipment components.

Report mechanical issues or damage immediately to the maintenance team.

Follow safety guidelines, environmental regulations, and organizational procedures.

Assist with general site tasks when machinery is not in use.

Proven experience operating heavy construction machinery.

Knowledge of European safety standards and regulations for construction sites.

Ability to read site plans, levels, and basic construction drawings.

Good physical fitness and ability to work in outdoor environments.

Strong coordination and mechanical awareness.

Familiarity with basic equipment maintenance.

Valid work permit for the target European country.

Heavy equipment operation licenses or certifications (e.g., CPCS, CSCS, VCA, or country-specific operator permits).

Driver’s license (often required for machinery transport).

Experience with GPS-guided or automated machinery systems is a plus.

High safety awareness and responsibility

Precision and attention to detail

Strong communication and teamwork skills

Ability to work under pressure and meet project schedules

Reliability and professional work ethic

Perform welding tasks using MIG, MAG, TIG, Stick (SMAW), or other welding techniques depending on project requirements.

Read and interpret technical drawings, blueprints, and welding symbols.

Prepare materials by cutting, grinding, and cleaning metal surfaces before welding.

Set up, adjust, and operate welding machines and related tools.

Inspect welds visually and with measuring tools to ensure quality and compliance with specifications.

Repair metal structures, frames, pipes, and mechanical components.

Perform fabrication work such as cutting, bending, and assembling metal parts.

Follow safety procedures and maintain a safe working environment.

Collaborate with engineers, supervisors, and other technicians on-site or in the workshop.

Maintain tools and welding equipment in good working condition.

Previous experience as a Welder or metal fabricator.

Proficiency in one or more welding methods (e.g., MIG/MAG, TIG, Stick).

Ability to read and understand technical drawings and welding symbols.

Knowledge of metals, materials, and welding techniques.

Good physical condition and ability to work in different environments (indoor/outdoor).

Understanding of European safety standards related to welding and metalwork.

Valid work permit for the target European country.

Welding certification (e.g., ISO 9606, EN standards, or equivalent).

Driver’s license.

Experience in stainless steel, aluminum, or pipe welding (if required by the employer).

Precision and attention to detail

Strong work ethic and reliability

Problem-solving skills

Ability to work independently or as part of a team

Good communication and time management skills

Operate excavators of various sizes for digging, trenching, grading, and loading materials.

Read and follow site plans, levels, and instructions from engineers or supervisors.

Perform excavation for foundations, utilities, pipelines, and landscaping work.

Load trucks with soil, gravel, debris, or construction materials safely and efficiently.

Maintain machine control in tight or complex working conditions.

Conduct daily equipment inspections, checking oil, fuel, hydraulics, tracks, and controls.

Report any mechanical issues or unsafe conditions to the maintenance or site team.

Follow all safety rules, environmental regulations, and company procedures.

Assist with general site tasks when machinery is not in use.

Proven experience operating excavators in construction or civil engineering projects.

Ability to read site drawings, grade levels, and follow layout instructions.

Knowledge of European safety standards and machine operation rules.

Good physical fitness and ability to work in outdoor environments.

Strong coordination and mechanical understanding of heavy equipment.

Basic maintenance skills for excavators.

Valid work permit for the target European country.

Excavator operator license or certification (e.g., CPCS, CSCS, VCA, or country-specific permits).

Driver’s license (often required for commuting or machinery transport).

Experience with GPS-controlled excavators is an advantage.

High safety awareness

Attention to detail and precise machine control

Good communication and teamwork skills

Reliability and strong work ethic

Ability to work under pressure and meet project deadlines

Operate heavy trucks (e.g., flatbed, tipper, container, or box trucks) to transport construction materials and equipment.

Load and unload materials safely using manual methods or mechanical equipment when required.

Inspect the truck daily, checking brakes, lights, tires, oil, and overall mechanical condition.

Secure loads properly using straps, chains, and covers according to safety regulations.

Follow planned routes and schedules while complying with European road and traffic laws.

Maintain accurate delivery records, logs, and transport documentation.

Report mechanical issues, delays, or incidents to the supervisor or fleet management.

Collaborate with warehouse staff, construction teams, and site supervisors.

Keep the truck clean and in good working condition at all times.

Ensure safe driving practices to protect materials, equipment, and personnel.

Proven experience as a truck driver, preferably in materials or construction transport.

Valid commercial driving license for the country (e.g., EU Category C or C+E).

Knowledge of European transportation regulations, tachograph rules, and driving hours.

Ability to operate different types of trucks safely.

Good physical fitness and ability to assist with loading/unloading.

Basic mechanical understanding for handling minor issues and inspections.

Valid work permit for the target European country.

CPC (Certificate of Professional Competence) or equivalent EU driver qualification.

ADR certificate (for hazardous materials) if required.

Experience driving long distances or cross-border routes.

Strong sense of responsibility and safety awareness

Reliability and punctuality

Good communication and teamwork skills

Ability to manage time and meet delivery schedules

Problem-solving skills, especially during delays or technical issues